Four Recessed Tie-Down D-Rings, Square Trailer Cargo Tie-Down Anchors, + Mounting Lock Plate + Installation Bolting Hardware Accessories - Carriage Bolts, Hex Nuts, Flat Washers

4-Pack Flush Mount D-Ring Cargo Tie-Down Anchors Installation Kit for Flatbeds, Utility Trailer, Pickup Truck BedThese recessed-pan fitting D-rings are made specifically for when you cannot have an idle D-ring popping out of the floor of your vehicle, tripping people and getting in the way of cargo placement. The square recessed pan gets bolted into your wooden floor; the D-ring lies flush in the pan when not in use and can be lifted upward for use as a cargo tie-down anchor. Galvanized Steel D-RingThis D-ring has a clearance of 1 1/2" x 1 1/2". It is made of steel that can endure the elements and is galvanized to resist corrosion and rust. This flush mount D-ring pan fitting has a working load limit of 2,000 pounds.A Simple Guide to Installing Your Recessed-Pan Fitting D-Ring Tie-Down Anchors1. Try to choose a versatile tie-down spot that will be convenient for all kinds of loads. Corners of truck beds and trailers are often optimal.2. Place the back plate over the area where you wish to install your recessed tie-down and draw diagonal lines from hole to hole to achieve that perfect center spot; then use a hole saw and chisel to create a 3" x 2-7/8" pocket with a depth that advances from 9/16" deep to 1-1/8" deep because the recessed-pan fittings are deeper on one side.3. The recessed-pan fitting has four pre-drilled holes - one in each corner. They are square holes, ensures compatibility with the provided carriage bolts. Once you’ve created the hole needed, put the pan fitting in its place and drill through the bolting holes; then hold a mounting plate on the underside of the mounting surface (your trailer, truck bed, or table) and insert the appropriate bolts into the 4 holes, securing with lock nuts and washers.4. Your tie-down anchor is now ready to go! Use it to anchor chains, S-hook straps, bungee cords, motorcycle tie-downs, and other cargo control products.

• This is the Complete Installation Bundle. When you need to safely transport your motorcycle, snowmobile, landscaping equipment, farm tools, and other gear, these large recessed tie-down anchor D-rings are the absolute elite in superior tie-down anchors; they are easy to install and offer lifetime strength and versatility; the mounting plates offer incredible support to these trailer tie-down anchors, spreading the load over a larger area!
• See images for a DETAILED SKETCH + HOW-TO showing all DIMENSIONS + INSTRUCTIONS of these D-ring pan fitting tie-downs and back plates; bundle includes 4 square 4-3/4" x 4-1/2" galvanized steel recessed pan fitting D-ring trailer tie down anchors with holes on the bottom of the pans that ensure water weeps out (assembly break strength of 6,000 pounds and a safe working load limit of 2,000 pounds), + 1/10" thick black steel trailer plates + bolting hardware
• Square 1/2" x 1/2" diameter bolting holes are perfect for securing with the PROVIDED Grade A ASTM A307 2.5" long 3/8" diameter carriage head bolts, hex nuts, 3/32" flat washers
• These tie-downs can be used in so many custom ways! Easily anchor logistic tie-downs, S-hook or J-hook ratchet and cam straps, tarp straps, bungee cords, motorcycle tie-downs, clevis grab hook chains, ropes, and nylon soft loops on pickup truck beds, utility trailers, flatbeds, in enclosed trailers, boats, and vans by inserting the hook ends or strap webbing through the 1 1/2" x 1 1/2" (inner clearance) D-rings on these recessed-pan fittings
• This product includes 4 recessed D-ring anchors + compatible lock plates + bolting hardware.