CCTREE TPU Filament 1.75mm, High Speed&High Elasticity, Shore 95A Flexible 3D Printer Filament, 1KG (2.2lbs) Spool, Dimensional Accuracy ±0.03mm, Fits Most FDM Printers, Red

CCTREE is using advanced spooling technique aiming to make orderly wind and tangle-free filament. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of ± 0.03mm. It is the official partner of Creality 3D. Also, It is the ” default ” recommended filaments for many desktop and industrial 3D printers. It has the following characteristics: Rubber-like, soft and stretchable. High resistance to chemical and UV exposure, as well to heat Without nozzle clogging, Easy stick to the hot bed applied with washable glue stick or craft glue The data are intended as a general guide only and do not necessarily represent results that may be obtained elsewhere. Base Material: TPU Diameter: 1.75 mm Tolerance: ± 0.03mm Net Weight: 1 kg Loop Length: 315 m Spool Size: Diameter 195mm + inner hub 55mm + height 60mm Shipping Weight: 1.2 kg Shipping Size: 21 x 21 x 7 cm Specific Gravity: 0.98 g/cm3 Tensile Strength: 50 Mpa Impact Strength: >3 KJ/m2, Izod Hardness: 90-95 SHORE A Surface finish: Glossy Transparency: Opaque Processability: Fair Printing Parameters The information is given for reference only, adjust to the demand of users. Extruder Type: Direct Drive/Bowden Tube Layer Height: 0.1-0.4 mm Fill Density: 100% Printing Speed: 20-40 mm/s (Set slow printing rate is important for TPU materials) Printing Temperature: 230 - 240°C (446-464°F) Bed Temperature: 0-50°C (32-112°F) ; Recommended Bed Temperature: 40-50°C (104-112°F) Retraction Speed: 20-55 mm/s Retraction Distance: 3-8 mm Default nozzle Diameter: 0.4mm

• 【Shore Hardness 95A】Balanced softness and durability allow for printing wearables, phone cases, seals, gaskets, and vibration-damping parts with strong layer bonding.
• 【TPU Recommend Settings】We recommend printing at a nozzle temperature of 230 - 240°C (446-464°F), bed temperature of 40-50°C (104-112°F), printing speed of 20-40mm/s((Set slow printing rate is important for TPU materials)
• 【High-Quality TPU Material】Thermoplastic Polyurethane (TPU) is a flexible, abrasion-resistant thermoplastic. this filament offers excellent flexibility, elasticity, and impact resistance — ideal for parts that need to bend or compress
• 【Smooth Feeding & Tangle-Free】Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, no cracking, no deformation, easy handling, resulting in an outstanding surface finish and are highly precise
• 【Wide Compatibility】Works with most FDM 3D printers supporting flexible filaments, If you have any product quality problems, don't hesitate to contact us