230V Soft Ceramic Hot Air Device Rubber Stamp Heat Shrinkable Film DIY Appliance, UK Plug(White)

1. Size: about 22 x 2 cm, the length of the cord is about 90 cm
2. Weight: about 350 grams
3. Rated power: 300W
4. Rated voltage: 230V
5. Working temperature: about 200 degrees Celsius
6. Uses: soft ceramic, heat shrinkable sheet heating tool

Instructions:
1. Plug in the power and turn on the switch
2. Keep a distance of 3-5cm from the work, and heat it at an angle of about 45 degrees until the work is completed
3. Turn off the power and wait for it to cool down

Note:
1. The hot air gun has a high temperature, so be careful of burns when using it
2. Can not adjust the temperature, theoretically the muzzle temperature can reach about 200 degrees Celsius within a few seconds
3. When blowing soft clay, do not stay in one place for a long time, and don’t blow it for a long time.
4. Do not stop for more than 3 minutes and then blow again. the angle is about 45 degrees to prevent heat from sucking back